| |
LUCENT CELLPIPE 20A-GX-E
This setup assumes you have a PPPOE connection like DSL running.
Follow these simple steps to configure your Lucent CellPipe for RealTimeQuery.
1.) To access the utility of the Router, launch Windows
Hyper Terminal, choose TCP/IP (Winsock) as connection
type and enter the Router’s default IP address, as the host address. Or go to Windows Start,
Run menu, and type your Router’s default IP address.
2.) In the telnet sessions that starts enter these commands,
each on a single line:
pat addpatin pppoe 7220/tcp client's IP
[return]
save
[return]
Client's IP is the IP address of your computer
(ex. 192.168.1.10) running RealTimeQuery.
| | |